Yak 7


Quick Overview


  • 7,000 lb hydraulic worm gear winch 
  • Powered by an onboard hydraulic pump or PTO
  • Fast and variable recovery speeds for high working rate
  • High efficient and constant-operating torque motor
  • Irreversible single stage worm gear provides instant braking and slip free operation
  • An ergonomic T-handle for rapid wire rope payout
  • Heavy duty roller fairlead with grease zerk fittings
  • EN 14492-1 supported: 10:1 D/d ratio, 2:1 wire rope strength and 1.5d freeboard for severe duty car and commercial recovery
  • Standard Compliance: CE Machinery Directive 2006/42/EC, EN 14492-1:2006 Power Driven Winches and SAE J706
  • Specification/Part Numbers
  • Part number: PN 681260 (Std. drum)  / PN 681266 (Long drum) 
  • Rated line pull: 3,175 kg / 7,000 lb (SAE J706 rating)  3,200 kg (EN 14492-1 rating)
  • Line speed (at 1st layer of rope) : 5.2 mpm at 40 l/min (17.1 fpm at 10.6 g/min)
  • Operation pressure: 110 bar / 1,595 psi
  • Max oil flow: 40 l/min (10.6 g/min)
  • Hydraulic motor: 48.6 cm3/rev (3.0 in3/rev)
  • Gear ratio: 1-stage planetary gear 50:1 
  • Winch construction: Aluminum die cast housings with steel drum
  • Clutch (Freespooling): Worm gear disengaged
  • Brake: Irreversible worm gear
  • Rotation of winch: Wire rope shall be under-wound orientation only
  • Drum barrel diameter: 90 mm (3.5")
  • Drum flange diameter: 168 mm (6.6”)
  • Distance between flanges: 160 mm (6.3") - Std. drum  240 mm (9.5") - Long drum 
  • Mounting bolts pattern: 130 x 211 mm (5.1" x 8.3”) - Std. drum 130 x 291 mm (5.1” x 11.5”)  - Long drum 
  • Wire rope recommended: 
  • *10 mm x 10.7 m for Std. drum and 16.2 m for Long drum, 1,960 N/mm2 grade with a minimum breaking strength of 69.8 kN required for EN 14492-1 rating.
  • *3/8" x 57.4' for Std. drum and 87.3' for Long drum, EIPS grade with a minimum breaking strength of 15,663 lbf required for SAE J706 rating
  • Winch weight: 29 kg / 63.9 lb - Std. drum 33 kg / 72.8 lb - Long drum 
  • Gross weight : 29 kg / 63.9 lb  - Std. drum 33 kg / 72.8 lb - Long drum
  • Box dimension, (L x D x H) : 417 x 386 x 256 mm (16.4" x 15.2" x 10.1")  - Std.drum 497 x 386 x 256 mm (19.6" x 15.2" x 10.1") -Long drum

Compliant with EN 14492-1 requirements for vehicle recovery winch:
* The working coefficient for the first rope layer on the drum shall be at least 2.
* The D/d ratio to the center of the rope shall be at least 10 for the drum.

Rp. 25.500.000

Details

  • 7,000 lb hydraulic worm gear winch 
  • Powered by an onboard hydraulic pump or PTO
  • Fast and variable recovery speeds for high working rate
  • High efficient and constant-operating torque motor
  • Irreversible single stage worm gear provides instant braking and slip free operation
  • An ergonomic T-handle for rapid wire rope payout
  • Heavy duty roller fairlead with grease zerk fittings
  • EN 14492-1 supported: 10:1 D/d ratio, 2:1 wire rope strength and 1.5d freeboard for severe duty car and commercial recovery
  • Standard Compliance: CE Machinery Directive 2006/42/EC, EN 14492-1:2006 Power Driven Winches and SAE J706
  • Specification/Part Numbers
  • Part number: PN 681260 (Std. drum)  / PN 681266 (Long drum) 
  • Rated line pull: 3,175 kg / 7,000 lb (SAE J706 rating)  3,200 kg (EN 14492-1 rating)
  • Line speed (at 1st layer of rope) : 5.2 mpm at 40 l/min (17.1 fpm at 10.6 g/min)
  • Operation pressure: 110 bar / 1,595 psi
  • Max oil flow: 40 l/min (10.6 g/min)
  • Hydraulic motor: 48.6 cm3/rev (3.0 in3/rev)
  • Gear ratio: 1-stage planetary gear 50:1 
  • Winch construction: Aluminum die cast housings with steel drum
  • Clutch (Freespooling): Worm gear disengaged
  • Brake: Irreversible worm gear
  • Rotation of winch: Wire rope shall be under-wound orientation only
  • Drum barrel diameter: 90 mm (3.5")
  • Drum flange diameter: 168 mm (6.6”)
  • Distance between flanges: 160 mm (6.3") - Std. drum  240 mm (9.5") - Long drum 
  • Mounting bolts pattern: 130 x 211 mm (5.1" x 8.3”) - Std. drum 130 x 291 mm (5.1” x 11.5”)  - Long drum 
  • Wire rope recommended: 
  • *10 mm x 10.7 m for Std. drum and 16.2 m for Long drum, 1,960 N/mm2 grade with a minimum breaking strength of 69.8 kN required for EN 14492-1 rating.
  • *3/8" x 57.4' for Std. drum and 87.3' for Long drum, EIPS grade with a minimum breaking strength of 15,663 lbf required for SAE J706 rating
  • Winch weight: 29 kg / 63.9 lb - Std. drum 33 kg / 72.8 lb - Long drum 
  • Gross weight : 29 kg / 63.9 lb  - Std. drum 33 kg / 72.8 lb - Long drum
  • Box dimension, (L x D x H) : 417 x 386 x 256 mm (16.4" x 15.2" x 10.1")  - Std.drum 497 x 386 x 256 mm (19.6" x 15.2" x 10.1") -Long drum

Compliant with EN 14492-1 requirements for vehicle recovery winch:
* The working coefficient for the first rope layer on the drum shall be at least 2.
* The D/d ratio to the center of the rope shall be at least 10 for the drum.

Distributor Winch & Hoist Jakarta