HV-12


Quick Overview


  • Powered by a PTO/power take off unit driven pump
  • Fast and variable recovery speeds for high work rate
  • Highly efficient and constant operating torque motor
  • 2 stage planetary gear train for greater pulling force
  • Turn clutch by ergonomic T-handle for rapid wire rope payout
  • Drag brake and over center valve providing complete braking
  • EN 14492-1 supported: 10:1 D/d ratio and 2:1 wire rope strength allow severe duty vehicles and commercial recovery
  • Meet SAE J706, CE machinery directive 2006/42/EC and EN 14492-1:2006 Power Driven Winches
Rp. 46.000.000

Details

Specification/Part Numbers
  • Part number: PN 684311 (Std. drum)  / PN 685433 (Std. drum - Clutch in left side)
  • Rated line pull: 5,440 kg / 12,000 lb (SAE J706 rating) 
                                5.100 kg (EN 14492-1 rating)
  • Line speed (at 1st layer of rope) : 10 mpm at 60 l/min (33 fpm at 15.9 g/min)
  • Operation pressure: 150 bar / 2,175 psi
  • Max oil flow: 60 l/min (15.9 g/min)
  • Hydraulic motor: 125 cm3/rev (7.6 in3/rev)
  • Gear ratio: 2-stage planetary gear 19.4:1 
  • Winch construction: Aluminum die cast housings with steel drum
  • Clutch (Freespooling): Rotating ring gear
  • Brake: Spring applied drag brake together with over-center valve supplied
  • Rotation of winch: Wire rope shall be under-wound orientation only
  • Drum barrel diameter: 114.3 mm (4.5")
  • Drum flange diameter: 252 mm (9.9”)
  • Distance between flanges: 255 mm (10") 
  • Mounting bolts pattern: 303.5 x 114.3 mm (12” x 4.5”)
                                               368.5 x 171.2 mm (14.5” x 6.7”)
  • Wire rope recommended: 12 mm x 39 m (1/2" x 128'), 1,960 N/mm2 (EIPS) grade with a minimum breaking strength of 100.5 kN (22,552 lbf) required for SAE J706 and EN 14492-1 ratings
  • Winch weight: 71 kg / 156.5 lb
  • Gross weight: 87 kg / 191.8 lb 
  • Box dimension, (L x D x H) : 735 x 430 x 335 mm (29" x 16.9" x 13.2"

    Compliant with EN 14492-1 requirements for vehicle recovery winch:
    * The working coefficient for the first rope layer on the drum shall be at least 2.
    * The D/d ratio to the center of the rope shall be at least 10 for the drum.
    * Drum freeboard shall be at least 1.5 x rope diameter

Performance Data: 

Line Pull and Rope Capacity
Line Speed
Layer of Wire Rope
Pull by layer, 
kg / lb
Total Rope on the Drum, m / ft
at 60 l/min (15.9 g/min), 
mpm / fpm
1st
5,440 / 12,000
8.2 / 26.9
10.0 / 33.0
2nd
4,570 / 10,075
18.0 / 59.1
11.6 / 38.1
3rd
3,939 / 8,684
29.3 / 96.1
13.5 / 44.3
4th
3,462 / 7,632
39.0 / 128.0
15.4 / 50.5

 Warning 
* The winch is not intended to be used in any manner for the movement or lifting of personnel. 
* The rated line pull shown is based on the first layer of rope on the drum. 
* The rope winding on the drum shall remain 5 wraps from the drum.

Warranty
Each new winch is guaranteed against defects in workmanship and material defects for a period of twelve months from date of purchase.
 
Dimension, mm/in:

Hydraulic System Installation:

Accessory:

Standard Accessories Option Accessories
  • 245 mm throat roller fairlead
  • Over center valve
  • Cable tensioner
  • Air clutch

Distributor Winch & Hoist Jakarta